Philips BDL5571V User Manual Download Page 37

Page: 37 / 58

User Manual BDL5571V

4.2.3. AUDIO MENU

Balance

Adjust to emphasize left or right audio output balance.
Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Treble

Adjust to increase or decrease higher-pitched sounds.
Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Bass

Adjust to increase or decrease lower-pitched sounds.
Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Speaker

Set the monitor to play audio using the built-in (internal) speaker or external speakers.
Use the

DOWN

button to toggle between



Internal



External

Volume

Adjust to increase or decrease the audio output level.
Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Mute

To turn the mute function on/off.
Press the

SET/PLUS

button to open the submenu, and then press the

DOWN

button to make

selection.

Summary of Contents for BDL5571V



























































Search results

Summary of Contents for BDL5571V

Reviews:

Related manuals for BDL5571V

Brands by name

Popular brands

Philips BDL5571V, User Manual

Search results

Summary of Contents for BDL5571V

Reviews:

Related manuals for BDL5571V

Brands by name

Popular brands