Philips BDL5531EL/00 Service Manual Download Page 7

Page: 7 / 129

BDL5531EL LCD

Installation

USING HDMI INPUT

1. Connect the DVI-D connector of the PC to the HDMI connector of the

display using a DVI-HDMI cable.

2. Insert the audio cable to the AUDIO IN (AUDIO1) input of the display

and connect to the corresponding PC connector.

EXTERNAL AUDIO CONNECTION

CONNECTING EXTERNAL SPEAKER

1. Connect the speaker wires to the external speaker (SPEAKERS)

output of the display.

2. Turn on the unit.

Note: Make sure your display is turned off before connecting the speaker

wires.

CONNECTING EXTERNAL AUDIO DEVICE

Connect the red (R) and white (L) audio jacks of the external audio device

to the AUDIO OUT R/L jacks of the display.

CONNECTING ANOTHER BDL5531EL MONITOR

You can interconnect multiple BDL5531EL units to create a
daisy-chain configuration for applications such as a video wall.

Note: The number of displays that can be used in a daisy-chain
configuration will depend on the resolution of the input signal
being used.

• Connect the VGA OUT connector of the display to the VGA IN

connector of additional BDL5531EL unit.

• Connect the RS-232C OUT connector of the display to the

RS-232C IN connector of additional BDL5531EL unit.

• Connect the VIDEO OUT connector of the display to the VIDEO

IN connector of additional BDL5531EL unit.

• Connect the AC OUT connector of the display to the AC IN

connector of an external media player only.

Summary of Contents for BDL5531EL/00


































































































































Search results

Summary of Contents for BDL5531EL/00

Reviews:

Related manuals for BDL5531EL/00

Brands by name

Popular brands

Philips BDL5531EL/00, Service Manual

Search results

Summary of Contents for BDL5531EL/00

Reviews:

Related manuals for BDL5531EL/00

Brands by name

Popular brands