Philips BDL5531EL/00, Service Manual

Page: 11 / 129

BDL5531EL LCD 11
On-Screen Display
ʳ
AUDIO MENU AU
DIOVOLUMEMUTEAUDIO
Speaker
Set the display to play audio using the built-in (internal) speaker, external
speakers or external audio devices (if connected).
Use the
UP / DOWN button to toggle between
• Internal • External • Line-out
Volume
Adjust to increase or decrease the audio output level.
Use the
PLUS / MINUS button to adjust.
Mute
To turn the mute function on/off.
Use the
UP / DOWN button to make selection.
Audio source
To select the audio input source according to the source connected to the
audio input and HDMI sockets on the display.
Use the UP / DOWN button to toggle between
• AUDIO 1 • AUDIO 2
• AUDIO 3 • HDMI
Audio reset
Reset all settings in the Audio menu.
Use the PLUS / MINUS button to make selection. Select Reset and press
the SET button to restore settings to factory preset values. Press the
EXIT button to cancel and return to the previous menu.
ʳ
ʳ
PIP MENU
Notes:
• For Component, VGA, DVI-D and HDMI inputs only.
• For Full and Normal zoom modes only.
• The PIP function is turned off by default. Press the PIP ON/OFF button
on the remote control to turn on PIP and make it accessible from the OSD
menu.
PIP
To turn PIP mode on/off. Use the UP / DOWN button to make selection.
PIP input
Select the input signal for the sub-picture.
Use the UP / DOWN button to make selection.
PIP change
To exchange between the main picture and sub picture.
Use the PLUS / MINUS button to make selection. Select Reset and press
the SET button to restore settings to factory preset values. Press the
EXIT button to cancel and return to the previous menu.
PIP size
Select the size of the sub picture in the PIP mode.
Use the UP / DOWN button to toggle between
• Large • Middle • Small
PIP audio
Select the audio source in the PIP mode.
Use the UP / DOWN button to toggle between
• Main - Select audio from the main picture
• Sub - Select audio from the sub picture.
PIP reset
Reset all settings in the PIP menu.
Use the PLUS / MINUS button to make selection. Select Reset and press
the SET button to restore settings to factory preset values. Press the
EXIT button to cancel and return to the previous me
́̈
Notes: • The PIP function is only available under certain signal source
combinations as shown in the table below
(O : PIP function available, X : PIP function unavailable) • The availability
of the PIP function will also depend on the resolution of the input signal
being used.