Philips BDL5231V Page 10 User Manual Download

Page: 10 / 50

User Manual BDL5231V/00

Video Signal Cable

(D-SUB to D-SUB Cable)

Contents

The

BDL5231V

monitor pack* should include:

•      LCD monitor
• Power cord (1.8 m)
•      VGA Signal Cable (1.8 m)
•      User Manual
•      Remote Control and AAA Batteries
• Cable belt x 3 (For tightening cables)

•      Main switch cover
•      Screw for Main Switch cover x 2
•      BNC TO RCA adapter x 5
•

Logo guider

• Clamper
• Screw for Clamper x 2

User’s Manual

Screw for Main switch cover

(M3 x 6) x 2

Main switch cover

BNC TO RCA adapter x 5

* The supplied power cord varies depending on destination.

For EU For China

For North

America

Power cord

Cable belt x 3

(For tightening the power cord

and VGA / HDMI cable)

Remote Control and AAA

Batteries

* You might like to save the package box and packing material for shipping

the monitor.

* The following components are prepared as options.
• External Speakers
• Table stand

Xxxxxxxxxxxxxx

xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxx

Logo guider

* Please make sure that for all other regions, apply a power cord that conforms

to the AC voltage of the power socket and has been approved by and complies
with the safety regulations of the particular country.

Clamper

Screw for Clamper
(M4 x 8) x 2

Summary of Contents for BDL5231V



















































Search results

Summary of Contents for BDL5231V

Reviews:

Related manuals for BDL5231V

Brands by name

Popular brands

Philips BDL5231V, User Manual

Search results

Summary of Contents for BDL5231V

Reviews:

Related manuals for BDL5231V

Brands by name

Popular brands