Philips BDL4230E/00, Service Manual

Page: 99 / 122

BDL4230E LCD 99
General Product Specification
Europe O GB21520-2008
CECP
certificate
(
խഏᆏ౨റூ
)
Supplier
option
al
NAFTA USA E FCC Part 15 Class B
FCC report and
DoC
Supplier Yes
Sa = Safety
E = Electromagnetic Compatibility
O = Other which including recycling, energy saving, ergonomics ,GreenMark
X=X-Ray
Remark:
1. Supplier to provide all approbation documents, samples before CR
2. Supplier to pay approbation samples and transportation cost.
3. Supplier to pay Switzerland approbation cost and provide EN62311 report.
4. AC/DC adaptor have to meet California Energy Commission requirement
5. Supplier have to check regulation information on rating label, carton label, user manual to meet all
mandatory regulation
6. Supplier have to apply all mandatory regulation base on sales country.
9.2 EMC Requirements
Supplier DVT EMI test result must be submitted prior to FVT samples delivery, and PVT EMI test result
must be submitted again prior to PVT samples delivery. Which also has to meet Philips' immunity testing
specification.
9.4 RoHS
Restriction on the use of certain hazardous substances.
Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Bipheny1 (PBB) and Polybrominated
Bipheny1 Ether (PBDE)(flame retardant).
9.5 WEEE
Producer (Philips) responsible for retailer take back schemes and recycling.
-- System implemented.
-- Collection and recycle targets.
9.6 Ongoing Regulatory
There's a possibility that other regulatory certificates will be required during the life of the product. It is the
responsibility of the supplier to provide related documentation.
10. DQE Test Items Template
Product Release Test: DQE/DQA:
The objective of Design Quality Assurance process is to define the activities to be taken by concerning
within the Product Creation Process to manage the quality and reliability of products in a more coherent
and systematic approach.
The scope of Design Quality Assurance process covers all activities to ensure the design quality and
reliability in Product Creation Process that starts from RFQ, Kick-off, EVT, DVT and PVT, Product release
phase & Pilot run and CR & MP phase.
Design Quality Assurance procedure covers the system flow charts and the activities described as below.