Philips BDL4230E/00, Service Manual

Page: 105 / 122

BDL4230E LCD 105
General Product Specification
6.7 Power off/on interval ʳ v 1 1 ʳ ʳ Refer to Qisda
6.8 Mode cycling / OSD check
ʳ
v 1 1
ʳ ʳ
Refer to Qisda
6.9 MTBF Prediction v v - ʳ ʳ ʳ Refer to Qisda
6.10 MTBF demo
ʳ
v 3
ʳ
v 2 Refer to Qisda
6.11 Acoustic noise ʳ v 1 ʳ v 1 Refer to Qisda
6.12 Father/Mother ʳ v 1 ʳ ʳ ʳ
Check power after
100 times unplug
6.13 EHT ʳ ʳ ʳ ʳ ʳ ʳ ʳ
6.14 X-ray protection
ʳ ʳ ʳ ʳ ʳ ʳ ʳ
6.15 Flash over ʳ ʳ ʳ ʳ ʳ ʳ ʳ
6.16 Mechnical assembler quality
ʳ
v 1
ʳ
v 1 Refer to 8.xx
6.17 Vibration (2G/3 axial)/Thermal cycling
ʳ
v N/A
ʳ ʳ ʳ
Reserve to discuss
due to panel did not
test
7 Environment Reliability tests ʳ ʳ ʳ ʳ ʳ ʳ ʳ
7.1 Cold, non operational and packed
ʳ
v 1
ʳ ʳ ʳ
MMD: -25 degree
for 96 hours
7.2 Dry heat, non operational and packed
ʳ
v 1
ʳ ʳ ʳ
MMD: 70 degree for
96 hours
7.3
Thermal step stress, operational and non
packed
ʳ v 1 ʳ ʳ ʳ
84 hours, original is
168hrs
7.4 Cold start up, operational and non packed
ʳ
v 1
ʳ ʳ ʳ
24 hours
7.5 Cold storage, operational and non packed ʳ v 1 ʳ ʳ ʳ
Add -10 degree
storage 24 hours
before cold start
(not in US model)
-10, operating for 4
hours
-10, storage for 20
hours
2 cycles
7.6 Dry heat, non packed and w/o operational ʳ v 1 ʳ ʳ ʳ 70 degree 96 hours
7.7 Altitude (Low air pressure) (PDP and CRT)
ʳ
v N/A
ʳ ʳ ʳ ʳ
8 Mechanical ( Transportation ) Tests
ʳ ʳ ʳ ʳ ʳ ʳ
8.1
Non operational and packed random vibration
test
ʳ v 1 ʳ v 1 Refer to Qisda
8.2 Operational vibration test
ʳ
v 1
ʳ
v 1 Refer to Qisda
8.3 Drop test ʳ v 1 ʳ v 1
Refer to Qisda
(could refer to 8.4)
8.4 Boundary drop test
ʳ
v 1
ʳ
v 1
Drop +10% height
8.5 Cold drop test ʳ v 1 ʳ v 1
-10 degree, storage
for 16 hours, then
do drop test
8.6 Half-sine shock test ʳ v N/A ʳ v N/A
Reserve to discuss
due to panel did not
test
8.7 Bump ʳ v N/A ʳ v N/A
ʳ
8.8 DBC ʳ v - ʳ v N/A
Provide panel data
8.9 Compression test
ʳ
v -
ʳ
v N/A
Provide vendor's
report
8.10 Mechanical Aspect and Tests ʳ ʳ ʳ ʳ ʳ ʳ ʳ
8.10.1 Assembled stand (salt spray)
ʳ
v N/A
ʳ ʳ ʳ ʳ
8.10.2 Stand base warpage
ʳ
v N/A
ʳ
v N/A
ʳ
8.10.3
Positioning (slant, assembly)
ʳ v N/A ʳ v N/A ʳ