Philips basicPalette II Installation And Setup Gude Download Page 9 | Manualshive

Page: 9 / 88

background image

1

Palette II Lighting Control Console

Installation & Setup Guide

INTRODUCTION

1. About This Guide

Congratulations on your purchase of a Strand Lighting Palette II Lighting Control Console. This guide provides
important information regarding safety, installation, and operation for all console hardware components.
Familiarizing yourself with this information will help you get the most out of your lighting system.

This guide describes the installation and operational procedures for Strand Lighting's Palette II Series Control
Consoles pertaining to the following models:

• 92800 basicPalette II Console

• 92801 32/64 presetPalette II Console

• 92802 48/96 presetPalette II Console

• 92803 classicPalette II 150 Console

• 92804 classicPalette II 250 Console

• 92805 classicPalette II 500 Console

* Other channel counts may apply

Avoid spilling liquid on the equipment If this should happen, switch the equipment off immediately. To reduce the
risk of fire or electric shock, do not expose the equipment to rain or moisture.

For indoor use only.

This equipment is designed and manufactured to comply with international safety standards IEC950, UL1950, CS950
and is intended for use as part of a lighting control system. It must not be used for other purposes where there is a risk
of safety to persons. The equipment contains power voltages, socket outlets will be installed near the equipment and
be easily accessible.

• Working Voltage/Current: 90 - 240v

• Frequency: 50/60 Hz

• Max Ambient Temp: 50° C (122° F)

• Do not restrict ventilation

WARNING!

It is important to read ALL included safety and installation instructions to avoid damage to the product

and potential injury to yourself or others.

2. Additional Documentation

The console's graphical user interface (GUI) is provided by Horizon Control, Inc. For detailed instructions on using
the PaletteOS software, refer to the PaletteOS Software

Help Menu

within the software itself.

For the latest software documentation updates, please visit:

w ww.strandlighting.com

For more information regarding DMX512 systems, refer to the DMX512/1990 Standards publication available from
United States Institute for Theatre Technology, Inc. (USITT).

USITT
6443 Ridings Road
Syracuse, NY 13206-1111 USA
1-800-93USITT
www.usitt.org

«
...
7
8
9
10
11
...
»

Summary of Contents for basicPalette II

























































































Reviews:

No comments

Related manuals for basicPalette II

Brand: jbc Pages: 4

Brand: Aalborg Pages: 15

Brand: Aalborg Pages: 48

Brand: Accel Pages: 8

Brand: C3 Custom Coolers Pages: 16

Brand: Eaton Pages: 12

Brand: S&P Pages: 17

Brand: S&S Northern Pages: 9

Brand: RAKwireless Pages: 6

Brand: CAME Pages: 2

Brand: OEM Pages: 8

Brand: ABB Pages: 102

Brand: J+J Pages: 4

Brand: Val Controls Pages: 6

Brand: Ban Seok Pages: 9

Brand: Absima Pages: 5

Brand: Fibocom Pages: 79

Brand: oventrop Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands