INSTRUCTION FOR USE (excerpt)
0
OP
EN
MODE
0
OPE
N
• FM: The headphone wire is used as FM antenna.
If necessary move it for optimum reception.
• MW: The internal MW antenna is directed by turning the player.
Antennas
PROGRAM
CK
RADIO
·BAND
ET
·
You can tune to any FM or MW station automatically or manually.
Stereo stations are indicated by
ST
.
1 Press RADIO·BAND to switch the radio on.
2 Press RADIO·BAND if necessary repeatedly to select the desired waveband.
y
FM
1
,
FM
2
,
FM
3
,
FM
4
or
MW
is shown.
Tuning to radio stations automatically
1 Keep
3
or
4
pressed for at least 1 second.
y
The radio tunes to a station with sufficient strength and radio play starts.
A
(for “automatic search”) and the current waveband and frequency are displayed.
2 Repeat searching until you find the desired radio station.
Tuning to radio stations manually
1 Keep
3
or
4
pressed.
2 Release
3
or
4
, then briefly press
3
or
4
again when you are close to the desired
frequency.
3 Briefly press
3
or
4
repeatedly until you reach the desired frequency.
y
Radio play starts. The current waveband and frequency are displayed.
• To switch from radio play to CD play press
2;
.
• Press
9
to switch the radio off.
Note: In case of interferences in stereo mode press ·MODE to switch to mono.
Radio play
PRO
GRA
M
CLOCK
RADIO
·BAND
SET·
You can select up to 99 tracks and store them in memory in a desired sequence.
Any track can be stored more than once.
1 While playback is stopped, select a track with
∞
or
§
.
2 Press PROGRAM to store the track.
y
PROGRAM
lights up; the track number programmed and
P
with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press
2;
to start playback of your selected tracks.
y
PROGRAM
is shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
y
The display shows all stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected,
SELECt
is displayed.
– If you try to store more than 99 tracks,
FULL
is displayed.
Clearing the program
1 If necessary, press
9
to stop playback.
2 Press
9
to clear the program.
y
CLEAr
is displayed once,
PROGRAM
goes off and the program is cleared.
Notes:
The program will also be cleared if you
– interrupt the power supply or
– open the CD lid.
Programming track numbers
1-4
CS 46 690