CD/VCD/MP3-CD
16
English
AZ 2536/01
page
16
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in
the memory in any order.
1.
In stop mode, press
PROG
to enter program setting.
™
PROG
will start flashing and "
P01
" will be displayed.
™
On TV screen, "PROG" program list (5 lines per page) will be displayed.
2.
Press
∞
/
§
(or use
digits 0 - 9
or press
¡
,
™
on the remote control) to select the desired track.
•
MP3-CD mode only:
First press
ALBUM/PRESET -
,
+
once or more (or press
digits 0 - 9
or
3
/
4
on the remote
control) to find your album,
press PROG to store the selected album
, and then press
∞
/
§
(or use
digits 0 - 9
or press
¡
,
™
on the remote control) to select the desired track.
3.
Press
PROG
to confirm the track number to be stored.
™
Display shows "
P02
", indicating the next program location available.
4.
Repeat steps
1-3
to select and store all desired tracks.
™
Display:
if you try to program more than 20 tracks.
5.
Press
2;
to play the programmed tracks.
• If you select
REPEAT/REPEAT ALL
during program playback, the current track or all programmed
tracks will be played repeatedly.
™
REPEAT/REPEAT ALL
icon and
PROG
will appear on the display.
Reviewing the program
In the stop position, press
PROG
repeatedly to see your stored track numbers.
™
The display first shows the number of program location and then, the number of the track stored
here.
™
For MP3-CD only: The display first shows the number of program location and then, the album
number for the track stored here. To see the track number, press
PROG
again.
Erasing a program
You can erase the contents of the memory by:
• opening the CD door;
• selecting
FM, MW
or
TAPE
sound sources;
• pressing
9
twice during playback or once in the stop position.
=
PROG
disappears.
PROGRAMMING TRACKS
AZ2536_01 eng 4/7/2004 05:51 PM Page 16
