34
EN
[Tone controls]
Settings menu
Audio synchs
Listening mode
Tone controls
Pure tone
: Off
Treble :
0dB
Bass :
0dB
Pure Tone allows you vary or completely
bypass the tone control section of the High
De
fi
nition A/V Receiver.
If
•
[Off]
is selected, the Tone Control
circuits are active. Select
[On]
to bypass
the Tone Controls effectively defeating the
effect of the tone control circuits.
The High De
fi
nition A/V Receiver has two
Tone Control levels -
[Treble]
and
[Bass]
.
Bass and Treble controls only affect the
•
low bass and high treble leaving the critical
midrange frequencies free of colouration.
These controls allow one to tweak
on-the-
fl
y, the frequency response of the
source. Use the
vV
buttons to adjust
Treble and Bass within the range ± 10 dB
Video setup
Listening Mode setup
Language setup
Speaker setup
Source setup
Trigger setup
Settings menu
Video setup
Picture setup
[Picture setup]
Color
:
50
Brightness
:
50
Video modes
: Custom
Contrast
: 50
Picture setup
MPEG Noise reduction : Off
Cross Color suppresor : Off
Film Mode detection
: Off
Picture setup can be defaulted to
[Normal]
or
[Custom]
. While at
[Video modes]
menu item,
select
[Normal]
to retain the default picture
setup settings. If you would like to further
improve the picture settings or adjust the
parametres according to your preference, set
[Video modes]
to
[Custom]
. The following
parametres can be adjusted.
[Brightness]
•
– Adjust overall brightness of
the picture.
[Contrast]
•
– Adjust bright areas (white
level) of the picture.
[Color]
•
– If brightness and contrast levels
are set optimally, adjust the colour control
to the level of your preference.
[MPEG Noise reduction]
•
– This setting is
designed to address two speci
fi
c types of
video distortion - mosquito noise and
blocking artifacts. Set the level to High,
Medium or Low.
