Philips AVENT SCD603H, User Manual

Page: 4 / 25

4
3.1.2 Placing the non-rechargeable batteries
in case of a power failure, the baby unit can run
on four 1.5V R6 AAA alkaline batteries (not included).
Do not use rechargeable batteries. The baby
unit does not have a charging function and
rechargeable batteries discharge slowly when
they are not in use.
B
Warning:
Unplug the baby unit and make sure your hands
and the unit are dry when you insert non-
rechargeable batteries.
D
Note:
The baby unit has an operating time of 3 hours
when you use it on non-rechargeable alkaline
batteries with the night light turned on.
1
Remove the battery compartment lid.
2
insert four non-rechargeable alkaline batteries.
D
Note:
Make sure the + and - poles point in the
right direction.
II Baby unit
1 Antenna
2 Power-on light
3 Microphone
4 Lens
5 Loudspeaker
6 Base
7 Nightlight and nightlight button
8 Wall-mounting holes
9 Battery compartment lid
10 Socket for appliance plug
11 On/off switch
12 Appliance plug
13 Adapter
3 Preparing for use
IMPORTANT: Read the important safety
instructions carefully before you use the
video baby monitor and keep them for
future reference
.
3.1 Baby unit
Always operate the baby unit connected to an
electrical outlet. To guarantee automatic power
backup in case of a power failure, we advise you
to insert non-rechargeable batteries.
3.1.1 Connecting the baby unit
1
Put the appliance plug in the baby unit and
insert the adapter into an electrical outlet.