TROUBLESHOOTING
26
Problem Possible
cause Solution
No power,
Batteries
playback does
Batteries inserted incorrectly
Insert the batteries
not start
correctly.
Batteries are empty.
Change the batteries.
Contact pins are dirty.
Clean them with a cloth.
Mains adapter
Loose connection
Connect the adapter
securely.
In-car use
Cigarette lighter is not powered Switch on ignition or insert
when ignition is off.
batteries.
nF dISC
CD-RW (CD-R) is not recorded
Use FINALIZE on the
indication
properly.
CD recorder to complete
the recording.
no dISC
The CD is badly
Replace or clean the CD.
indication
scratched or dirty.
CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up.
Wait until the lens has
cleared.
HoLd
indication
HOLD is activated.
Deactivate HOLD.
and/or no reaction
Electrostatic discharge
Disconnect the set from
to controls
power supply or take out
the batteries for
a few seconds.
The CD skips tracks.
The CD is damaged or dirty.
Replace or clean the CD.
RESUME
,
SHUFFLE
or
PROGRAM
is Switch
RESUME
,
SHUFFLE
active. or
PROGRAM
off.
English
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
AZT9240/01 eng 23/2/01 17:28 Page 26
