5
Close the trimmer (‘click’).
Cleaning and maintenance
Never use compressed air, scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to clean the shaver
and the charging stand (AT941/AT940 only).
Always unplug the shaver before you clean it under the tap.
- Clean the shaver after every shave for optimal shaving performance.
- Regular cleaning guarantees better shaving performance.
- For the best cleaning results, we advise you to use the Philips Cleaning
spray (HQ110).
- Be careful with hot water. Always check if the water is not too hot,
to prevent your hands from getting burnt.
Note: Water may leak from the socket at the bottom of the shaver when you
rinse it. This is normal and not dangerous because all electronics are enclosed
in a sealed power unit inside the shaver.
Cleaning the shaving unit under the tap
1
Switch off the shaver.
2
Press the release button to open the shaving unit.
3
Rinse the shaving unit and hair chamber under a hot tap
for 30 seconds.
Be careful with hot water. Always check if the water is not too hot,
to prevent your hands from getting burnt.
- Rinse the hair chamber and the inside of the shaving unit.
ENGLISH
10
Summary of Contents for AT7 SERIES
Page 2: ...1 2 3 4 7 10 5 6 14 13 12 11 9 8 1 ...
Page 230: ...8222 002 0079 4 ...
