background image

Tape operation/recording

Playing a tape (Cassette A or B)

1

Push the 

Source selector

to

TAPE

2

Press

STOP

EJECT

9/

to open the 

cassette holder and insert a cassette and close
the deck.

3

Press

PLAY 

1

to start playback.

4

To pause playback press 

PAUSE

;

.

To resume, press the key again.

5

By pressing 

F.F/REW

or

6

,

fast forwading/ rewinding of the tape is 
possible in both directions. To stop fast 
winding, press 

9

/

/

.

6

To stop the tape, press 

9

/

/

.

Helpful hints:

During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless

PAUSE

;

mode has been

activated.)

During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are
also released.

Non-stop playback from Cassette A to
Cassette B 

1

Push the 

Source selector

to

TAPE

2

Insert a cassette tape in both Cassette A and
Cassette B, then close both decks.

3

Press

PLAY 

1

on Cassette A to start play-

back.

4

Press

PLAY 

1

on Cassette B.

Cassette B is in standby for playback.

5

Cassette B playback will auto start when
Cassette A comes to the end of the tape.

The playback will auto stop until the end of
tape B.

General information on recording 

Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.

For recording, use only NORMAL type cas-
settes (IEC type I) on which the tabs have
not yet been broken.This deck is not suited
for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes.

The best recording level is set automatically.
Altering the 

VOLUME

will not affect the

recording.

To protect a tape from accidental erasure,
break out the tabs. If you wish to record again,
cover the tabs with a piece of adhesive tape.

Recording from the Radio 
(Cassette B only)

1

Select

RADIO

source.

2

Tune to the desired radio station (see 

Radio

reception

).

3

Press

9

/

/

on the 

Cassette B

to open the

cassette holder. Insert a blank tape and close
the deck.

4

Press

REC

0

to start recording.

5

For brief interruptions press 

;

.

To resume recording, press 

;

again.

6

To stop recording, press 

9

/

/

.

Helpful hints:

When recording from radio stations, adjust

DUBBING/BEAT CUT

on the top panel to 

1

or

2

, if necessary, to reduce interference.

Cassette Recorder

Summary of Contents for AQ7170










Reviews: