Setup-Clock Display/Memory Status
Clock/Alarm
Setup-Clock Display
You can set whether to display clock or not
in photo mode.
1 Press
CLOCK
.
2 Press
SETUP
.
3 Press
UP
or
DOWN
repeatedly to
highlight
Clock Display
.
4 Press
SELECT
.
5 Press
UP
or
DOWN
to select
ON
or
OFF
.
6 Press
SELECT
to save setting and exit.
Viewing Memory Status
You can check the occupied memory and
how much capacity is left.
1
Press
CLOCK
.
2
Press
SETUP
.
3
Press
DOWN
repeatedly to highlight
Memory Status
.
The memory occupation status of photo
and voice memo is displayed respectively.
4
Press
UP
to enter other settings.
5
Press
BACK
to exit setting.
Helpful hints:
During setting the set, if no button is pressed
within 10 seconds, the set returns to SETUP
mode automatically.
➜
–
Displaying clock
1
Press
CLOCK
.
To activate or deactivate
alarm
1
Press
ALARM
repeatedly.
is displayed when alarm is activated.
disappears when alarm is deactivated.
Repeating alarm
You can repeat the alarm call at 9-minute
intervals.
During the alarm call, press
REPEAT
ALARM / BRIGHTNESS CONTROL
.
fl ashes.
Helpful hints:
During alarm call, if no button is pressed, alarm
call will last 30 minutes.
Note:
For instructions on setting the clock and alarm,
please refer to
chapter
Setup - Clock
and
Setup - Alarm
.
➜
➜
➜
–
–
AJL305_79_CCR.indd 8
AJL305_79_CCR.indd 8
2008-01-25 9:44:04 AM
2008-01-25 9:44:04 AM
