6
EN
3 Get
started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located on the bottom of the clock
radio.
Plug and set
Time has been preset at the factory. When
power is connected, the set time is displayed
automatically.
The built-in lithium battery can maintain clock
setting despite power interruption.
Select time zone
If the hour digits of the preset time do not
match your local time, you need adjust the time
zone settings.
1
In standby mode, press
TIME ZONE
.
»
The current time zone number blinks
on the display panel.
2
Press
TIME ZONE
repeatedly to select
time zone (-1 to +12 adjustable).
For Europe:
Western European Time (WET)
+0
Central European Time (CET)
+1 (De-
fault)
Eastern European Time (EET)
+2
Moscow Standard Time (MST)
+3
Set clock
In standby mode, you can set clock manually.
1
Press and hold
SET TIME
for 2 seconds..
»
The hour digits blink.
2
Rotate
+ TUNING -
to adjust hour.
3
Press
SET TIME
"
»
The minute digits blink.
4
Repeat steps 2-3 to set the minute and
12/24 hour format.
Tip
You can also press
12/24H·DST
repeatedly to select
12/24 hour format.