10
EN
6 Product
information
Note
Product information is subject to change without prior notice.
Rated Output Power
0.6W RMS
Speaker
Speaker Impedance
8 ohm
Speaker Driver
1.5''
Tuner
Tuning Range
FM: 87.5 - 108 MHz
Tuning grid
FM: 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
FM: <22 dBf
FM: <51.5 dBf
Search Selectivity
FM: <28 dBu
Total Harmonic Distortion FM: <5%
Signal to Noise Ratio
FM: >50 dBA
General information
AC Power
100-240 V,
50/60 Hz
Operation Power
Consumption
3 W
Standby Power
Consumption
<1 W
Dimensions
- Main Unit (W x H x D) 144 x 144 x 65 mm
Weight
- With Packing
- Main Unit
0.73 kg
0.45 kg
7 Troubleshooting
Warning
Never remove the casing of this clock radio.
To keep the warranty valid, never try to repair
the clock radio yourself.
If you encounter problems when using this
clock radio, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/welcome). When you contact
Philips, ensure that the clock radio is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the
clock radio is connected properly.
Ensure that there is power at the AC
outlet.
No response from the clock radio
Disconnect and reconnect the AC power
plug, then turn on the clock radio again.
Poor radio reception
Increase the distance between the unit and
your TV or VCR.
Fully extend the FM antenna.
Alarm does not work
Set the clock/alarm correctly.
Clock/alarm setting erased
Power has been interrupted or the power
plug has been disconnected.
Reset the clock/alarm.