9
EN
5 Listen to FM
radio
Tune to FM radio stations
Tip
•
Position the antenna as far as possible from any
electrical appliances.
•
For better reception, fully extend and adjust the
position of the antenna.
1
Press
SOURCE
to select FM mode.
2
Press and hold
+ TUNING/ HR -
for two
seconds.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more radio
stations.
To tune to a station manually:
• In FM tuner mode, press
+ TUNING/ HR
-
repeatedly to select a frequency.
Store FM radio stations
automatically
• In FM tuner mode, press and hold
SCAN
for two seconds.
»
The radio stores all the available FM
radio stations, and then broadcasts the
first available station automatically.
Store FM radio stations
manually
Note
•
You can store a maximum of 20 FM radio stations.
1
In FM tuner mode, tune to an FM radio
station.
2
Press
PROG
to enter programming mode.
»
The preset number begins to blink.
3
Press
+ TUNING/ HR -
repeatedly to
select a number.
4
Press
PROG
to confirm.
5
Repeat steps 1 to 4 to store other stations.
Tip
•
To remove a pre-stored station, store another station
in its place.
Select a preset FM radio
station
• In FM tuner mode, press
+ PRESET/ MIN -
repeatedly to select a preset radio station.
Use FM menu
1
In FM mode, press and hold
MENU
for
two seconds to access FM menu.
2
Press
+ TUNING/ HR -
to scroll through
the menu options:
•
[Scan setting]
•
[System]
(see the Chapter "
Use
system menu
")
3
To select an option, press
SELECT
.
4
Repeat steps 2 to 3 if any sub-option is
available under one option.
[Scan setting]
(scan setting)
•
[All stations]
(all stations): scan all the
available FM radio stations.
•
[Strong stations only]
(strong stations
only): scan FM radio stations with
strong signals only.
