Notes:
– The weather forecast based on the
atmospheric pressure may vary slightly
from the actual weather situation.
– The weather forecasts from this unit are
predictions that covers the next 12 to 24
hours. It may not necessarily reflect the
current situation.
Using the sensor to detect
outdoor temperature
The main unit comes with a outdoor sensor.
Using the sensor, the unit is capable to meas-
ure and display outdoor temperature
through receiving data trasmitted from the
sensor placed at other location.
Wirelessly Connecting the sensor to
the main unit
1
Place the sensor in a desired open area.The
place must be within 50 meters away from
the main unit. Make sure the sensor is
loaded with the batteries.
•
For the first time
using the outdoor sen-
sor and the main unit, press
RESET
located
on the sensor back, and
RESET
located in
the battery compartment of the main unit.
Then, the main unit will begin to receive
transmission from the sensor.
•
To update the outdoor temperature from
the sensor any time, press and hold
AUTO
SCAN/DATE
for 5 seconds.
•
The temperature will be updated from the
sensor about every 3 minutes.
➜
When the outdoor temperature is updating
with the sensor searching,
is displayed
on the main unit. (See
4
)
To Improve the sensor reception
In case of intermittent/no connection,
•
slide the
CHANNEL
switch to Channel
2
or
3
, located in the battery compartment of
the sensor, then repeat the setup connection
described above.
•
reduce the distance between the sensor and
the main unit.
•
press and hold
AUTO SCAN /DATE
for
about 3 seconds to force the main unit to
search for the remote sensor signal.
Note:
– The effective range of the sensor is 50
meters away from the main unit.The range
may vary from the actual geographical
situation.
Indoor temperature and
humidity
•
The unit can also auto measure and display
current temperature. in Centigrade (oC) or
Fahrenheit (oF).
•
Press
DISPLAY
to toggle the display
between indoor temperature, indoor humidi-
ty and outdoor temperature (See
2
,
3
,
4
).
•
Press and hold
DISPLAY
to enter auto-
scroll mode. Screen mode will show for 5
seconds.
•
To select between oC or oF reading, use the
(oC oF)
slide switch (located in the battery
compartment).
Illumination brightness
Press
REPEAT ALARM / BRIGHTNESS
CONTROL
once or more.
•
The brightness of the display can be adjusted:
Bright
➟
Low
➟
Off
➟
Bright
Low battery indication
When the batteries of the main unit or the
sensor are running low, the low battery icon
will be displayed on the main unit, or the
sensor, indicating that the batteries should be
replaced soon.
Temperature and humidity
Safety and maintenance
AJ260_CCR 2007.8.17 14:04 Page 8
Summary of Contents for AJ260
Page 2: ...1 7 2 3 4 5 6 9 0 8 3 5 6 7 1 2 4 1 ...
Page 3: ...2 3 4 ...
Page 13: ...1 7 2 3 4 5 6 9 0 8 3 5 6 7 1 2 4 1 ...
Page 14: ...2 3 4 ...
