Digital tuner
Alarm
Digital tuner
Tuning to radio station
1
Press
RADIO ON/OFF
to switch on the
radio (FM only).
➜
The radio station frequency and the wave-
band will be displayed. (See
3
).
2
Press and hold
/-
until the
frequency in the display starts running.
➜
The radio automatically tunes to a station
of sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
•
To tune to a weak station, press
TUNING
+/-
briefly and repeatedly until you have
found optimal reception.
To improve reception:
FM: Extend and adjust the pigtail for optimum
reception.
Programming radio stations
You can store up to a total of 10 radio sta-
tions in the memory (10 FM) manually or
automatically (Auto store). Any previous pre-
sets will be erased.
Manual programming
1
Tune to your desired station (see
Tuning to
radio stations
).
2
Press and hold
/-
to activate pro-
gramming
.
➜
Display:
PRESET
flashes.
3
Press
/-
once or more to allocate
a number from 1 to 10.
4
Repeat steps 1-3 to store other stations.
Helpful hints:
–
You can erase a preset station by storing
another frequency in its place.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1
In radio mode, press
AUTO SCAN/DATE
until the frequency in the display starts
running.
➜
Available stations are programmed (FM).
After all stations are stored, the first auto-
store preset station will then automatically
play.
To listen to a preset or autostored
station
Press the
/-
buttons once or
more until the desired preset station is dis-
played.
Using the alarm
AJ260 allows you to simultaneously set two
different alarms (ALARM 1 and ALARM 2 )
which can go off in the radio or buzzer
mode.The clock time needs to be set
correctly before using alarm.
Setting alarm time
1
Press briefly
ALM 1
or
ALM 2
to display
AL1 or AL2 icon.
2
Press and hold
ALM 1
/
ALM 2
for two
seconds.
➜
The hour digits flash.
3
Hold down or press
/-
repeat-
edly to adjust the hours.
4
Press
ALM 1
/
ALM 2
to confirm the setting.
➜
AL1/AL2 icon and the minute digits flash.
5
Hold down or press
/-
repeat-
edly to adjust the minutes.
6
Press
ALM 1
/
ALM 2
to confirm the setting.
Helpful hints:
– In standby mode, press
DATE
to display
month and day information. In radio mode,
to display alarm time, press
ALM 1
/
ALM 2
.
Selecting alarm mode (activating)
1
Press
RADIO ON/OFF
to switch to
standby.
2
Select your choice of alarm mode: either
radio, or buzzer by using the
RADIO•BUZ
slider.
3
Press
ALM 1
/
ALM 2
once or more to
display
.
➜
When alarm is activated,
is displayed.
(See
4
).
•
At the set alarm time, radio or buzzer will
switch on automatically.
AJ260_CCR 2007.8.17 14:04 Page 6
Summary of Contents for AJ260
Page 2: ...1 7 2 3 4 5 6 9 0 8 3 5 6 7 1 2 4 1 ...
Page 3: ...2 3 4 ...
Page 13: ...1 7 2 3 4 5 6 9 0 8 3 5 6 7 1 2 4 1 ...
Page 14: ...2 3 4 ...
