SETTING THE ALARM
SWITCHING OFF THE ALARM
10
Gentle wake volume
A sure way of getting up in the mornings, the
gentle wake
volume
for the alarm begins from zero volume (
Lo:00
) and
gradually increases to a high of 14 (
). If, however, you wish
to change the default volume settings for the buzzer melody, radio
or CD alarm:
1.
In the standby mode, press
ALARM 1
or
2 MODE•OFF
once.
2.
As soon as
Lo:00
appears, press
UP
7
or
DOWN
8
once or
more until you reach the desired level (0-32). This sets the
starting volume of your alarm.
3.
To set the maximum volume for your alarm, press
ALARM 1
or
2 MODE•OFF
again to change to the
display.
4.
As soon as
appears, press
UP
7
or
DOWN
8
until you reach the desired volume level (a
number equal or greater than the
Lo
, low setting).
Notes:
– The gentle wake volume settings do not affect normal CD
playback and radio volume level.
– It is not possible to check the gentle wake volume setting
during the active alarm call as pressing
ALARM 1
or
2
MODE•OFF
cancels the alarm completely.
– It is not possible to adjust the gentle wake volume during CD
playback mode.
There are three ways of switching off the alarm. Unless you cancel
the alarm completely, the
24-HOUR ALARM RESET
will be
automatically selected after 59 minutes, from the time your alarm
time goes off.
24-HOUR ALARM RESET
If you want the alarm to be stopped immediately but also wish to
retain the same alarm setting for the following day:
• Press
24-HOUR ALARM RESET
or
9
STOP•OFF
.
– You will hear a beep tone to confirm that the
24-HOUR
ALARM RESET
has been activated.
CANCELING THE ALARM COMPLETELY
To cancel the set alarm time before it goes off, or during the alarm
call:
• Press
9
STOP•OFF
.
• Press
ALARM 1
or
2 MODE•OFF
once or more until the
selected alarm indicator disappears from the display.
SWITCHING OFF THE ALARM
AJ 3935 /00
page
10
English
g e
n t
l e
w
a k
e
BRIG
H TN
ESS C
O
NTROL
RE
PEAT
ALAR
M
XP AJ 3936/00-1.1 22-06-2000 12:43 Pagina 10
