19
EN
6 Storage
1
Turn off the Air Performer and unplug it from the power socket.
2
Clean the Air Performer, particle sensor and the surface of the filter (see
chapter “Cleaning and maintenance”).
3
Let all parts air dry thoroughly before storing.
4
Wrap the filter in air tight plastic bags.
5
Store the Air Performer, filter in a cool, dry location.
6
Always thoroughly wash your hands after handling the filter.
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with that information below,
contact the Consumer Care Center in your country.
Problem
Possible solution
The airflow from
the air outlet
is significantly
weaker than
before.
•
The surface of the filter is dirty. Clean the surface of the
filter (see the chapter “Cleaning and maintenance” ).
The air quality
does not improve
even though the
appliance has been
operating for a
long time�
•
Check whether the packaging material is removed from
the filter.
•
Check whether the filter is installed in the appliance.
•
Clean the sensor with vacuum cleanser or a dry cotton
swab.
•
The room size is too large, or the outdoor air quality is
poor. For optimum purification performance, close the
doors and windows when operating the appliance.
•
There are indoor pollution sources. Examples include
cigarette smoke, cooking fumes, incense, perfume, and
alcohol.
•
The filter has reached its end of life. Replace the filter with
a new one.
My appliance is
not turning off
immediately in
heating mode.
•
If the appliance is running in heating mode when you turn
it off, it continues working for a few seconds to exhaust
the remaining heat.
