Philips Active Crystals FM01SW80, User Manual, Page: 6 / 72

Microsoft
®
Windows
®
Vista, XP, 2000, ME or MACOS 9.0 or higher:
•
The USB memory key driver is installed automatically when the drive is connected to a USB port of
the computer. However, with some USB 2.0 cards or boards, you may need to initiate installation
manually. In this case, follow the on screen instructions to search for a suitable driver. Refer to the
operating system's
Help file
if you need any help.
Note: Do not remove the USB memory key from the computer USB port as long as the download process
is in progress.
Windows 98SE:
1
Download the device driver at
www.active-crystals.com
.
2
Insert the memory key
USB connector
into one of the computer’s
USB ports
.
> The
New Hardware wizard
starts.
3
Click the
Next
button.
4
Click
Search for the best driver for your device
. Then click the
Next
button.
5
Click
Specify a location
. Then click the
Browse
button.
6
When the
dialog box
appears, specify the folder where the installation program is stored.
7
Click the
OK
button to close the
dialog box
. Then click the
Next
button.
8
Click the
Next
button.
9
Click the
Finish
button.
> Installation of the driver starts.
> Once the installation process is complete, a drive icon for the USB memory key appears in the
My Computer
window.
10
After confirming that the drive is in standby mode you can remove the drive from the computer’s
USB port
.
6
EN
Install