12
EN
Note
•
To optimize the lifetime of the pre-
filter, make sure it air dries completely
after cleaning.
•
Wash your hands after handling the
filter.
•
Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-filter are properly
attached to the air purifier.
7
To reattach the front panel, press
the top part of the panel onto the
top of the air purifier (1). Then,
gently push the panel against the
body of the air purifier (2) (fig.
i
).
8
Put the plug of the air purifier in the
power socket.
9
Touch the button to switch on
the appliance.
10
Touch and hold the reset button
for 3 seconds to reset the pre-filter
cleaning time.
11
Wash your hands thoroughly after
installing filters.
6 Replacing the
filters
Filter replacement
indicator
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is in
optimal condition when the air purifier
is operating. When the filters need to be
replaced, the filter code displays on the
screen (see Filter alert chart).
If the filters are not replaced in time,
the air purifier will stop operating and
automatically lock to protect the air
quality in the room. Replace the filters as
soon as possible according to the filter
code.
Replacing the filters
Note
•
The air filters are not washable or
reusable.
•
Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
•
Do not clean the filters with a vacuum.
•
If the pre-filter is damaged, worn or
broken, do not use. Visit
www.philips.com/support or contact
the Consumer Care Center in your
country.