Philips AC4236, User Manual

Page: 15 / 186

13 EN
English
Filter alert light status Action
The filter replacement alert lights
up (fig
z
)
Replace the NanoProtect filter Series 3
(FY4440/30)
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig
c
)�
3
Pull the filter from the appliance (fig
w
)�
4
Remove all packaging materials of the new filter (fig
e
)�
5
Put the new filter into the appliance (fig
f
)�
6
Reattach the back cover (fig
g
)�
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button for 3 seconds to reset the filter
lifetime counter (fig
{
)�
10
Wash your hands thoroughly after replacing the filter�
Note: Do not smell the filter as it has collected pollutants from the air�
Filter reset
You can replace the filter even before filter replacement alert ( ) displays on the screen�
After replacing a filter, you need to reset the filter lifetime counter manually�
1
Touch the power button for 3 seconds to turn off the appliance and unplug from
power socket�
2
Put the power plug in the power socket (fig
|
)�
3
Within 15 seconds after power on, touch and hold and button for 3 seconds to
reset the filter lifetime counter (fig
}
)�
6 Storage
1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, particle sensor and the surface of the filter (see chapter ‘Cleaning
and maintenance’)�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling the filter�