Configure bulb
.
Step 4 - Configure Bulb
In the following step, you will configure each
Philips
Hue bulb
.
To configure each Hue bulb…
1 -
Select a bulb to configure and press
OK
. The
bulb you selected is flashing.
2 -
Select
Start
and press
OK
.
3 -
First indicate where you placed the bulb relative
to the TV. A correct setting of the
Angle
will send the
correct Ambilight colour to the bulb. Select the slider
bar to adjust the position.
4 -
Secondly, indicate the
Distance
between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
adjust the distance.
5 -
Finally, set the
Brightness
of the bulb. Select the
slider bar to adjust the brightness.
6 -
To stop configuring this bulb, select
OK
and
press
OK
.
7 -
In the
Configure Amhue
menu, you can do
the same for each bulb.
8 -
When all Amhue bulbs are configured,
select
Finish
and press
OK
.
Amhue is ready for use.
Switch On or Off
You can switch off the Amhue effect on the
bulbs. The bulbs will light up white.
To switch off Amhue…
1 -
Press
SETTINGS, select
Amhue
and
press
OK
.
2 -
Select
Off
or
On
and press
OK
.
3 -
Press
(left) to go back one step or press
BACK to close the menu.
Immersion
You can adjust the level of the Ambilight effect for the
Amhue bulbs.
To adjust the Amhue Immersion…
1 -
Press
SETTINGS, select
All Settings
and
press
OK
.
2 -
Select
Ambilight
>
Amhue
and press
OK
.
3 -
Select
Immersion
and press
(right).
4 -
Press
(up) or
(down) to adjust the value.
5 -
Press
(left) to go back one step or press
BACK to close the menu.
View Configuration
In
View configuration
, you can consult the current
Amhue configuration. Which network you use,
how many bulbs are connected, etc.
To view the current Amhue setup…
1 -
Press
SETTINGS, select
All Settings
and
press
OK
.
2 -
Select
Ambilight
>
Amhue
and press
OK
.
3 -
Select
View Configuration
and press
OK
.
4 -
Press
(left) to go back one step or press
BACK to close the menu.
Reset Configuration
You can reset (uninstall) the complete Amhue
configuration in one go.
To reset the Amhue configuration…
1 -
Press
SETTINGS, select
All Settings
and
press
OK
.
2 -
Select
Ambilight
>
Amhue
and press
OK
.
3 -
Select
Reset Configuration
and press
OK
. The
configuration is reset.
4 -
Press
(left) to go back one step or press
BACK to close the menu.
Lounge Light
With the TV on standby, you can switch on Lounge
Light. Lounge Light is Ambilight without video. You
can also switch on Lounge Light when the TV is
switched on but the screen is switched off to save
energy — like when you are listening to a radio
station.
Standby
With the TV in standby, press
AMBILIGHT to
switch on Lounge Light. Press
again to toggle
through the different colour schemes as you can find
them in the Follow Colour menu. Press
again to
switch off.
Screen Off
With the TV switched on but the TV screen switched
off, press
AMBILIGHT to switch on Lounge
Light. With the
AMBILIGHT key you can toggle
through the audio style set in the Follow Audio menu
or the colour scheme set in the Follow Colour
menu. Press
again to switch off.
In Help, press the colour key
Keywords
and look
up
Screen Off
for more information on how to
switch off the screen to save energy while you are
listening to a radio station.
72
