Philips 822, Manual

Page: 36 / 91

34
Settings &
Quick Settings
Voice command
Voice command menu allows you to quickly activate a specific function: instead
of programming a hotkey, you simply set a voice tag that will activate a feature
when you pronounce the associated word. You can associate a Voice command
to the functions supported by the Hotkeys (see page 32).
1 To set a voice tag for voice command, press
C
, select Settings , Voice
command and press
,
.
2 Select <New> and press
,
, then browse the list to select the function
to be set with a voice tag. Press
,
to confirm your choice.
3 When Press OK and speak appears, follow the instructions displayed on
the screen. When prompted to record your voice tag, make sure you are
in a quiet environment, choose a short and simple word and clearly
pronounce it.
4 The next carousel menu allows you to Delete or Play the voice tag,
Change the function associated with this voice tag or Change the voice
tag used for this function.
5 Repeat the steps described above to add more voice commands. Press
e
to go back to the previous menu or
C
to go back to idle.
6 To activate a feature using the voice command, press and hold
,
when
in idle mode, then say the recorded voice tag.
Words recorded as voice tags can be played, changed or deleted at any time.
You can also set a voice tag for a voice dial instead of a voice command (see
“Voice dial” page 16).
L
The duration of a voice tag is 2 seconds. Up to 40 voice tags can be defined and
shared between voice dial and voice command.
Opens the Picture album
menu.
Opens the Phonebook
selection menu.
Opens the Screen theme
menu.
Opens the Brick game .
L
Subscription dependent
Picture album
Phonebook select.
Screen theme
Brick Game
Fisio822_GB_4311 255 55991.book Page 34 Mercredi, 26. mars 2003 1:59 13