16
Getting started
1
Slide out the battery cover.
2
Place the batteries in the correct
polarity as indicated and replace the
cover.
3.3.2 Charge battery
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor warns you by blinking
the battery icon. If this occurs during a
conversation, an alert tone sounds to
inform you that the battery is low. If the
battery level becomes exceedingly low,
the phone automatically switches off
shortly after the icon starts blinking and
any function in progress will not be
saved.
1
Place the handset on the charging
cradle of the base station. A beep is
emitted if the handset is placed
correctly.
2
The battery icon
on the display
blinks during charge.
3
The battery icon
becomes
steady when the handset is fully
charged.
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the
phone is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
icon
will blink.
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
3.4
Welcome mode
Before you first use your handset, you
need to configure it according to the
country of use. After charging it for a few
minutes,
Welcome
appears in various
languages. Follow these steps to
configure your phone:
1
Press
o
OK
to display a list of
countries.
2
Scroll
n
to find your country.
3
Press
o
OK
to confirm your
selection.
(
Waiting
… will be displayed while
the default line settings and menu
language for the selected country
are automatically configured.)
Warning
Note
Tip
Summary of Contents for 655 - Cell Phone 7 MB
Page 2: ......
