Philips 6000i Series, User Manual

Page: 9 / 22

7 EN
Reset the Wi-Fi connection
Note
• This applies when the default network
to which your purifier is connected has
changed.
•
Reset the Wi-Fi connection when your
default network has changed.
1
Put the plug of the air purifier in the
power socket and touch to turn
on the air purifier.
2
Touch and simultaneously for
3 seconds until you hear a beep.
» The air purifier goes to pairing
mode.
» The Wi-Fi indicator blinks
orange.
3
Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the first
time" section.
4
Launch the "
Clean Home+
" app and
click on " Connect a New Device "
or press the "
+
" button on the top
of the screen. Follow the onscreen
instructions to connect the air
purifier to your network.
5
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the "
Clean Home+ "
App for extensive and up-to-date
troubleshooting tips.
Note
•
This instruction is only valid when
the air purifier is being set up for the
first time. If the network has changed
or the setup needs to be performed
again, consult section
"
Reset the Wi-Fi
connection
"
on page 7.
•
If you want to connect more than
one air purifier to your smartphone
or tablet, you have to do this one by
one. Complete the set up of one air
purifier before you turn on the other air
purifier.
•
Make sure that the distance between
your smartphone or tablet and the air
purifier is less than 10 m without any
obstructions.
•
This App supports the latest versions
of Android and iOS. Please check
www.philips.com/cleanhome for the
latest update of supported operating
systems and devices.