14
EN
Changing filter type
1
Touch and
simultaneously
for 3 seconds to enter the filter type
change mode (fig.
€
).
»
Code (
A5
) of the NanoProtect
filter HEPA Series 3 displays on
the screen.
2
Touch to select filter code of the
new filter you will use (fig.
„
).
3
Touch and hold
for 3 seconds
to confirm the filter code of the new
filter (fig.
…
).
Note
•
After you have selected the filter code
of the new filter using the
button,
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4
After the new filter code is
confirmed, displays on the
screen (fig.
†
).
5
Repeat the above steps to change
the second filter type.
6
Tap and hold
for 3 seconds to
confirm the filter code and exist the
filter type change mode (fig.
‡
).
Note
•
Refer to the separate leaflet that comes
with the filter for more information on
different filter combinations for your
choice.
Note
•
Wash your hands after changing a filter.
•
This air purifier has no other user-
serviceable parts. For assistance,
contact the Consumer Care Center in
your country.
Filter force reset
You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch and
simultaneously for
3 seconds to enter the filter reset
mode (fig.
€
).
»
Code (
A5
) of the NanoProtect
filter HEPA Series 3 displays on
the screen.
2
Touch and hold
for 3 seconds to
force reset the filter lifetime counter
of the NanoProtect filter HEPA
Series 3 (fig.
).
3
Code
(C7)
of the NanoProtect filter
Active Carbon displays on the
screen after the lifetime counter of
the NanoProtect filter HEPA Series 3
has been reset (fig.
‚
).
4
Touch and hold
for 3 seconds to
force reset the filter lifetime counter
of the NanoProtect filter Active
Carbon and exit the filter reset
mode (fig.
ƒ
).
Summary of Contents for 6000i Series
Page 22: ......
