Mechanical Instructions
4.
4.3.12 Internal Speakers
1.
Gently release the tapes that secure the speaker cables.
2.
Unplug the speaker connector from the SSB.
3.
Take the speakers out.
When defective, replace the both units.
4.3.13 WIFI module
1.
Unplug the connector from the SSB.
2.
Remove fixation screw that secure the WIFI module,
getntly remove the module from the set.
When defective, replace the whole unit.
4.3.14 LCD Panel
Procedure
1.
Remove the SSB as described earlier.
2.
Remove the PSU as described earlier.
3.
Remove the keyboard control panel as described earlier.
4.
Remove the stand bracket as described earlier.
5.
Remove the IR Board as described earlier.
6.
Remove the WIFI module as earlier.
7.
Remove the fixations screws that fix the metal clamps to
the front bezel. Take out those clamps.
8.
Remove all other metal parts not belonging to the panel.
9.
Lift the LCD Panel from the bezel.
When defective, replace the whole unit.
4.3.15 Magnets on Bezel for External Speakers 8601 series
For holding the external speakers of the TV set several
magnets are mounted on the inside of the Deco frame.
Refer to
for the number of magnets and the
polarization.
Figure 4-22 Number of Magnets on Deco Bezel 8601 series
Refer to
for the mounted two piece and three piece
magnet assemblies.
Figure 4-23 Magnet Assemblies 8601 series
Refer to
for the location of the magnet assemblies
on the Deco frame.
Figure 4-24 Magnet Assemblies Location on Bezel 8601 series
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
19800_022_151011.eps
15-10-11
19800_032_151102.eps
15-11-02
Two piece magnet assembly
(S) N
(S) N
(S)
(S)
N
N
(S) N
Three piece magnet assembly
19800_023_151011.eps
15-10-11
Insertion in Deco frame side
