Mechanical Instructions
4.
Figure 4-12 Backcover Screw Location 8601 series 65”
4.3.2
Mounting the Backcover 8601 series
Attention!
When mounting the backcover after repair, don’t forget to put
new pieces of double sided tape on the display panel before
closing the backcover.
Procedure
1.
Make sure no pieces of double sided tape are left on the
Backcover or on the Display Panel.
Remove if any.
2.
Put four pieces of double sided tape on the Deco frame.
Follow the procedures of following drawings:
-
for 8601 series 55”,
for 8601 series 65”,
3.
Put the Backcover on the Display Panel.
4.
Insert the fixation screws and tighten. Refer to:
-
for 8601 series 55”.
for 8601 series 65”.
5.
Connect the AmbiLight connector of the SSB and mount
the AmbiLight door.
19800_029_151030.eps
15-10-30
Screws M3×6: 25x to panel + 3x to I/O brackets
