7
EN-GB
E
ngl
ish
4 Using TV
This section introduces the basic operations
of the TV.
Switch on, off, or standby
On or standby
Before you switch on the TV, make sure you
plugged the power cord into the AC power
outlet and on the back of the TV.
Turn on the TV
•
With the TV in Standby, press
(
Standby-Power on
) on the remote
control to switch the TV on. You can
also press the small joystick key on
the back of the TV to switch the TV
on in case you can’t find the remote
control or its batteries are empty
Switch to standby
•
Press the (
Standby-Power on
)
on the remote control. You can also
press the small joystick key on the
back of the TV.
Tip
•
In standby mode, the TV is still connected
to the mains power but consumes very little
energy.
•
To switch off the TV completely, disconnect
the power plug.
•
When disconnecting the power plug,
always pull the power plug, never the cord.
Ensure that you have full access to the
power plug, power cord and outlet socket
at all times.
Keys on TV
If you lost the remote control or its batteries
are empty, you can still do some basic TV
operations by using the joystick on the back
of the TV.
Switch channels
•
Press
C/-
on the remote
control.
•
Enter the channel number using the
number keys on the remote control.
•
Press
BACK
button on the remote
control to switch back to the previous
channel.
Switch channels from a channel
list
You can use the channel list to watch all the
channels that can be received.
1
Press
LIST
.
»
To display the channel list.
2
Use navigation button to select channels.
3
Press
OK
to watch the selected channel.
To close the channel list without switching
channels, press
LIST
again.
Summary of Contents for 50PUN6152/61
Page 2: ......
