background image

Detailed playback features and additional functions are described in the

accompanying owner’s manual.

continue...

VOLUME

SOURCE

STANDBY-ON

OPEN•CLOSE

PLAY•PAUSE

PREV

NEXT

SURROUND

STOP

BASS

TREBLE

PROGRAM

                

DVD VIDEO DIGITAL SURROUND SYSTEM

AV IN

SUPER VIDEO

Make sure your DVD system and

TV are connected and turned on!

Playing a disc

1

Press

 

DISC

 

on the remote control.

You can also adjust the SOURCE button on the front panel until “DISC” appears on the display panel.

2

Turn on the TV and select the correct Video In mode.

You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system).
Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or
VIDEO.
Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the
Video In channel.
Or, your TV remote control may have a button or switch that chooses different video modes.
Do not use channel 3 or 4 on the TV unless you are using an RF modulator.
See your TV manual for more details.

3

Press

 

OPEN•CLOSE

 

0

 

 

on the front of the DVD system and

 

load a disc, then

press the OPEN•CLOSE

 

0

  

again to close the disc tray

.

Make sure the disc label facing up.  For double-sided discs, load the side you want to play facing up.

4

Playback will start automatically.  If not, press 

ÉÅ

button

.

If a disc menu appears, use 

3

 

4

 

1

 

2

 buttons on the remote to make the necessary selection, then press

OK to confirm.  Or, use the numeric keypad on the remote to select features.  Follow the instructions
given in the disc menu.

5

To stop playback, press

 

STOP

Ç

.

Region Codes

DVDs must be labeled for ALL regions or for
Region 1 in order to play on this DVD system.

ALL

1

1)

Press 

SYSTEM MENU

 button.

The 

 icon will be highlighted in the menu bar on the TV

screen.

2)

Press 

4

 button to select the Picture Setup Menu item 

.

3)

Press 

2

 button to enter the Menu.

4)

Press 

4

 button to select ‘

VIDEO OUT

’ and 

2

 button to enter

the Menu.

5)

Press 

34

 to select and highlight :

S-VIDEO

 - if you use the S-Video connection.

PR PB Y/SCART

 - if you use the Component Video

Pr/Cr Pb/Cb Y

6)

Press 

OK

 button to confirm.

DVD system Video Output Selection for Proper Playback

CVBS & S-VIDEO

PR PB Y / SCART

Note:  SCART control not
available for use with your DVD
system.

Summary of Contents for 5 DVD-CD CHANGER HOME THEATER CLASS D AMPLIFIER MX3660D




























Reviews: