background image

18

Notice

Trademarks are the property of Koninklijke Philips N.V. or

their respective owners.
P&F Mexicana reserves the right to change products at any

time without being obliged to adjust earlier supplies

accordingly.

The material in this manual is believed adequate for the

intended use of the system. If the product or its individual

modules or procedures are used for purposes other than

those specified herein, confirmation of their validity and

suitability must be obtained. P&F Mexicana warrants that the

material itself does not infringe any United States patents. No

further warranty is expressed or implied.

P&F Mexicana cannot be held responsible neither for any

errors in the content of this document nor for any problems

as a result of the content in this document. Errors reported

to P&F Mexicana will be adapted and published on the P&F

Mexicana support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although

it has effective pixels of 99.999% or more, black dots or bright

points of light (red, green or blue) may appear constantly on

the screen. This is a structural property of the display (within

common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove

covers to the inside of the product. Repairs may only be done

by service centers and official repair shops. Failure to do so

shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any

adjustments or assembly procedures not recommended or

authorized in this manual shall void the warranty.

Positioning the TV

Large screen TVs are heavy. 2 people are required to carry and

handle a large screen TV.

Make sure to hold the upper and bottom

frames of the unit firmly as illustrated.

Install the unit in a horizontal and stable

position.

Do not install the unit in direct sunlight or in

a place subject to dust or strong vibration.

Depending on the environment, the

temperature of this unit may increase

slightly. This is not a malfunction.

When installing this unit in a temperate environment, avoid a place

with rapid temperature changes.

Operating temperature: 41°F (5°C) to 104°F (40°C)

This unit should not be used in a tropical environment as it has not

been evaluated under such conditions.

No objects should be placed directly on or under this unit, especially

lighted candles or other flaming objects.

Depending on your external devices, noise or disturbance of the

picture and / or sound may be generated if the unit is placed too

close to them. In this case, please ensure enough space between

the external devices and the unit.

Do not insert the AC power cord into the power socket outlet before

all the connections are made.

Ensure that you always have easy access to the AC power cord and

outlet to disconnect the TV from the AC outlet.

Before you move the TV, disconnect attached cables to prevent

damage to connectors, especially the TV tuner.

Be sure to unplug the AC power plug from the AC outlet before

moving or carrying the unit.

When moving the TV and then setting it down, please be careful not

to pinch the AC power cord under the unit.

Regulatory notices

WARNING :

To prevent injury, this apparatus must be securely

attached to the furniture / wall in accordance with the

instructions. Tipping, shaking or rocking the unit may

cause injury / death.

WARNING :

Never place a TV in an unstable location. A TV may fall,

causing serious personal injury or death. Many injuries,

particularly to children, can be avoided by taking simple

precautions such as:

Using cabinets or stands recommended by the

manufacturer of the TV.

Only using furniture that can safely support the TV.

Ensuring the TV is not overhanging the edge of the

supporting furniture.

Not placing the TV on tall furniture (for example,

cupboards or bookcases) without anchoring both the

furniture and the TV to a suitable support.

Not placing the TV on cloth or other materials that

may be located between the TV and supporting

furniture.

Educating the children about the dangers of climbing

on furniture to reach the TV or its controls.

If your existing TV is being retained and relocated, the same

considerations as above should be applied.

Do not place the unit on the furniture that is capable of being

tilted by a child and an adult leaning, pulling, standing or

climbing on it. A falling unit can cause serious injury or even

death.
In order to avoid interruption of ventilation, this unit should

not be placed in built-in equipment such as a book cabinet,

rack, etc., and the vents of this unit should not be covered

with anything such as a tablecloth, curtain, newspaper, etc.

Make sure that there is enough ventilation space (4inches /

10 cm or more) around this unit.
Press   to turn the unit on and go into standby mode. To

completely turn off the unit, you must unplug the AC power

plug from the AC power outlet.

Disconnect the AC power plug to shut the unit off when

trouble is found or not in use. The AC plug shall remain readily

available.

Never use a gas duster on this TV.

The gas trapped inside of this unit may cause ignition and

explosion.

Environmental care

The packaging of this product is intended to be recycled.

Contact your local authorities for information about how to

recycle the packaging.
For product recycling information, please visit -

www.recycle.philips.com

AC power plug

Chapter 4

Other information

Summary of Contents for 43PFL4504/F8








































Reviews: