BDS
Mirror TV Application Note
Release v0.5
6.1
Mirror TV – External Speaker Connectors
The Mirror TV provides outputs to connect build on/remote speakers. Refer to
the following picture:
•
To connect build on/remote speakers to the Mirror TV, follow these directions:
o
Turn off the Mirror TV and unplug the mains power cord
o
Connect the cables from the external speakers to the speaker connectors on
the Mirror TV
o
Secure the speaker cables by fastening the latches of the external speaker
connector
o
Connect the mains power cord back into the power outlet and turn on the
Mirror TV
•
To toggle the audio output between the internal speakers and the external speakers,
flip the Internal/External Speaker switch.
Important points to note when connecting external speakers
•
To ensure that the correct types of external speakers are connected to the Mirror TV,
refer to the chart below:
Mirror TV Model
Impedance
Power
32” - 42”
8 Ohms
15 W
•
When connecting remote speakers, take extra precaution to ensure that the speaker
impedance is correct and to prevent possible shorting of the speaker terminals.
Incorrect use may cause damage to the audio amplifier of the Mirror TV
•
To remove the remote or build on speakers, ensure that the power to the Mirror TV is
turned off, before removing the speakers from the connectors.
Copyright © Philips BDS-ITV 2005
11
