Philips 42PF9955 Manual Download Page 11

Page: 11 / 40

Installation

Teletext level 2.5

Some broadcasters offer the opportunity to see more colours, other
background colours and nicer pictures in the teletext pages.

Select

Teletext level 2.5

with the cursor down.

Press the cursor right to select

Teletext level 2.5 On

to take advantage of

this feature.

“

Press the cursor right again to select

Teletext level 2.5 Off

if you like the

more neutral teletext layout.
The selection made is valid for all channels which broadcast teletext.

Note: It may take a few seconds before teletext broadcast switches over to

Teletext level 2.5.

Centre mode

When you have connected a multi channel audio receiver to the receiver box
(see Connect peripheral equipment, p. 26) and you have selected

Centre

mode On

, the loudspeakers of the monitor will act as centre speaker, making

a separate centre speaker unnecessary.

Source

This menu allows you to select the peripheral you connected to one of the
external inputs.

Select

Source

with the cursor right.

Press the cursor down to select one of the external inputs.

“

Press the cursor right to enter the list of types of peripherals attached to the
selected input.

‘

Select the peripheral device with the cursor up/down.

Once you have selected the source, e.g.VCR, this source will automatically be
selected when your remote control is in VCR mode, see p. 10, and you press
the

key on the remote control.

Decoder

If a decoder or a descrambler is connected, see p. 24, you can define one or
more programme numbers as decoder programme numbers.

Select

Decoder

with the cursor right.

Select

Programme

with the cursor down.

“

Select the programme number under which you have stored the programme
coming from your decoder.

‘

Select

Status

• Select the input used to connect your decoder:

None

EXT1

EXT2

• Select

None

if you do not want the selected programme number being

activated as a decoder programme number.

General

Teletext level 2.5

Setup

On / Off

General

Centre mode

Setup

Source

EXT1

EXT2

EXT3

EXT4

EXT5

Front

Setup

1003.5 en 04-03-2003 09:13 Pagina 9

Summary of Contents for 42PF9955









































Search results

Summary of Contents for 42PF9955

Reviews:

Related manuals for 42PF9955

Brands by name

Popular brands

Philips 42PF9955, Manual

Search results

Summary of Contents for 42PF9955

Reviews:

Related manuals for 42PF9955

Brands by name

Popular brands