5
Use of the remote control
5
Use of the remote control
POWER
BRIGHTNESS
CONTRAST
ZOOM OUT
ZOOM IN
ZOOM ON/OFF
VGA
AV1
AV2
AV3
MUTE
AV MUTE
q
1
2
3
4
5
6
7
8
9
0
V
CH/PR
MENU
OK
¬
B
VGA
press repeatedly to select your computer
connected to the
VGA 1
or
2
connector or
to the
DVI-
D
connector.
AV1
,
AV2
,
AV3
press to select the peripherals connected
to the connector indicated on the monitor.
V
no function (except when in
combination with a TV receiver box and
a Home Cinema audio receiver)
¬
no function (except when in
combination with a TV receiver box and a
Home Cinema audio receiver)
CH/PR
Program selection
To browse through the sources selected.
B
to switch to standby or on again
MENU
to switch the menu on/off
cursor buttons to select your choice and
to alter a selected adjustment.
OK
to activate your choice
AV MUTE
to mute the picture or restore
it (if the monitor is used in monitor
mode).
When activated a green indicator starts
blinking in front of the monitor.
q
Picture format
See Picture 2 menu, p. 7.
Press the
q
button to switch between
the different picture formats.
BRIG/-
to adjust the brightness level of the
picture
CO/-
to adjust the contrast level of the picture
ZOOM ON/OFF
to activate/de-activate the zoom function.
See p. 7.
ZOOM IN/OUT
to adjust the zoom factor and to change
the magnification of the picture when
zoom is activated. See p. 7.
Use of the remote control
On screen information
When the monitor is used in the monitor mode, information about the active
source (
AV1
,
AV2
,
AV3
,
VGA1
,
VGA2
or
DVI
-D
) and the supported video,VGA or
HD-format of the selected source is displayed on the screen together with the
selected picture format and icons informing about AV mute.
1016.1 en 02-07-2002 09:46 Pagina 5
