Philips 42FD9935-93S, User Manual, Page: 5 / 12

3
Use of the remote control
3
POWER
BRIGHTNESS CONTRAST
ZOOM OUT ZOOM IN ZOOM ON/OFF
VGA AV1 AV2 AV3
MUTE
AV MUTE
q
1 2 3
4
5 6
7 8 9
0
V
CH/PR
MENU OK
¬
B
VGA
press repeatedly to select your computer
connected to the
VGA 1
or
2
connector.
AV1, AV2, AV3
press to select the peripherals connected
to the connector indicated on the monitor.
V
no function (except when in
combination with an electronic receiver
box.
¬
no function (except when in
combination with an electronic receiver
box.
CH/PR Program selection
To browse through the sources selected.
B
to switch to standby or on again
MENU
to switch the menu on/off
cursor buttons to select your choice and
to alter a selected adjustment.
OK
to activate your choice
AV MUTE
to mute the picture or restore
it (if the monitor is used in monitor
mode).
When activated a green indicator starts
blinking in front of the monitor.
q
Picture format
See Picture 2 menu, p. 5.
Press the
q
key to switch between the
different picture formats.
BRIG/-
to adjust the brightness level of the
picture
CO/-
to adjust the contrast level of the picture
ZOOM ON/OFF
to activate/de-activate the zoom function.
See p. 5.
ZOOM IN/OUT
to adjust the zoom factor and to change
the magnification of the picture when
zoom is activated. See p. 5.
Use of the remote control
2271.1 en 23-10-2003 15:52 Pagina 3