Philips 42FD9935-93S, User Manual, Page: 4 / 12

2 2
VGA 640x480 60, 72, 75, 85 Hz
Wide VGA 848x480 60 Hz
Wide VGA 852x480 60 Hz
MAC 640x480 66.67 Hz
MAC 832x624 74.55 Hz
MAC 1024x768 74.93 Hz
MAC 1152x870 75 Hz
SVGA 800x600 56, 60, 72, 75, 85 Hz
XGA 1024x768 60, 70, 75, 85 Hz
SXGA 1280x1024 60, 72 Hz
When a VGA computer is connected, the display selection is made
automatically.
A message is displayed when the monitor does not support the connected
VGA mode.
Switch your computer to a correct display mode.
R6 / AA
B
Use of the remote control
Computer Display modes
Operation
&
Insert the mains plug supplied into the mains inlet at the back of the
monitor and in the wall socket. Please, only use the supplied rim-earthed
mains cord which has to be inserted in a grounded socket.
é
Remote control: remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type LR6/AA-1.5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries batteries may not be disposed of with your
household waste. Please check on how to dispose of batteries according to local
regulations.
“
Make sure that your receiver box and/or PC are switched on and that your
PC is in the correct display mode.
‘
Switch the monitor on : Press the power button
B
at the right side of
the monitor.
A green indicator lights up and the screen comes on.
When the monitor does not receive a supported VGA signal and is not
connected to a receiver box the screen switches to standby and the red
indicator lights up.
When you switch on your monitor for the first time, and the monitor is
not connected to an electronic receiver box, the menu language
automatically appears on the screen.The explanation appears in different
languages one at a time.
Follow the instructions on screen to select the correct language or see
Setup menu, Language, p. 6.
2271.1 en 23-10-2003 15:52 Pagina 2