ENGLISH
23
C
5
Separate the cutter from the comb and
rinse clean under hot water.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
6
Replace the set back into the Razor Head
Assembly so that the ‘wings’ on the comb
fit within the brackets located towards the
center of the Assembly.
The set will only fit into the Razor Head
Assembly if the ‘wings’ are between the brackets.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
7
Repeat the process for the other two sets
of cutters and combs.
8
Replace the frame.
C
9
Press down and turn wheel clockwise until
it locks into place.
10
Replace the Razor Head Assembly back on
razor.
ENGLISH
22
IMPORTANT:
Dry or wipe stainless steel
housing with a towel or tissue every time you
rinse the razor to prevent scale from forming.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
6
You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1
Turn razor OFF, remove the charging plug
from the outlet and cord from the razor
or charging stand.
C
2
Press the razor head release button, open
and lift off the razor head assembly.
C
3
Turn the wheel counterclockwise and
remove the retaining frame.
4
Remove and clean one set of cutters and
combs at a time.
1
2
2
1
8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 22
