Philips 40PFL9715K User Manual Download Page 76

Page: 76 / 90

6.5 Devices

HDMI connections

• The HDMI-HDCP procedure might take a few seconds before

the picture from a device appears.

• If the TV does not recognise the device and there is no

picture, try switching from one device to another and back again

to restart the HDCP procedure. Or switch the device off and

back on again.

• If sound interruptions occur persistently, see the user manual of

the device to check the output settings. If that does not help,

connect an additional audio cable.

• If a DVI to HDMI adaptor is used, check that an additional

audio connection is in place to complete the DVI connection.

EasyLink HDMI-CEC

• Check if the connected device supports the HDMI-CEC

standard and is properly set up. Read the user manual that comes

with the device.

• Check if the HDMI cable is properly connected.

• Check if EasyLink on the TV and device is switched on.

• Make sure that the System audio control in your HDMI-CEC

audio devices is properly set up. Read the user manual that

comes with your audio device.

PC display

• The refresh rate of a PC connected to the TV with VGA or

DVI to HDMI adapter should set to 60Hz.

• Check that the correct resolution mode is selected on your

PC. See the list in

Help

Specifications

Display resolutions

Troubleshooting / Devices

Summary of Contents for 40PFL9715K



























































































Search results

Summary of Contents for 40PFL9715K

Reviews:

Related manuals for 40PFL9715K

Brands by name

Popular brands

Philips 40PFL9715K, User Manual

Search results

Summary of Contents for 40PFL9715K

Reviews:

Related manuals for 40PFL9715K

Brands by name

Popular brands