If Universal access does not appear in the Options menu,
switch on
Universal access
in Setup.
In
Help
, press
*
List
and look up
Universal access
for more
information.
Audio description
Switch on
Digital TV channels can broadcast special audio commentary
describing what is happening on screen. To be able to set the
Audio description audio and effects, you have to switch on
Audio description first. Also, before you can switch on Audio
description, you have to switch on
Universal access
.
Audio description
With
Audio description
, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .
1 -
With
Universal access
switched on, press
o
OPTIONS
and select the
Options
tab in the menu bar.
2 -
Select
Audio description
and press
OK
.
3 -
Select
On
and press
OK
.
You can check if an audio commentary is available.
In the Options menu, select
Audio language
and look for an
audio language marked with a
Ï
.
Speakers / Headphones
You can select where you want to hear the audio commentary.
On the TV speakers only, on the headphones only or on both.
To set
Speakers / Headphones
. . .
1 -
Press
h
, select
S
Setup
and press
OK
.
2 -
Select
Satellite settings
>
Languages
>
Audio description
>
Speakers / Headphones
and press
OK
.
3 -
Select
Speakers
,
Headphones
or
Sp headphones
and press
OK
.
4 -
Press
b
, repeatedly if necessary, to close the menu.
Mixed volume
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume . . .
1 -
Press
o
OPTIONS
and select the
Options
tab in the
menu bar.
2 -
Select
Universal access
>
Mixed volume
and press
OK
.
3 -
Use the arrows up and down to set the slider bar.
4 -
Press
OK
to confirm.
Audio effect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on
Audio effects
(if available) . . .
1 -
Press
h
, select
S
Setup
and press
OK
.
2 -
Select
Satellite settings
>
Languages
>
Audio description
>
Audio effects
and press
OK
.
3 -
Select
On
or
Off
and press
OK
.
4 -
Press
b
, repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 -
Press
h
, select
S
Setup
and press
OK
.
2 -
Select
Satellite settings
>
Languages
>
Audio description
>
Speech
and press
OK
.
3 -
Select
Descriptive
(audio) or
Subtitles
and press
OK
.
4 -
Press
b
, repeatedly if necessary, to close the menu.
Manual installation
Manual installation is intended for expert users.
You can use Manual installation to quickly add new channels
from a satellite transponder. You need to know the frequency
and polarization of the transponder. The TV will install all
channels of that transponder. If the transponder was installed
before, all its channels - the former and the new ones - are
moved to the end of the channel list All.
You cannot use Manual installation if you need to change the
number of satellites. If this is needed, you have to do a
complete installation with Install satellites.
To install a transponder . . .
1 -
Press
h
, select
S
Setup
and press
OK
.
2 -
Select
Satellite settings
and press
OK
.
3 -
Select
Channel installation
and press
OK
.
4 -
Select
Manual installation
and press
OK
.
5 -
If you have more than 1 satellite installed, select the
satellite/LNB for which you want to add channels.
6 -
Set the
Polarization
you need. If you set the
Symbol rate
mode
to
Manual
, you can enter the symbol rate in
Symbol
rate
manually. Enter the
Frequency
and start searching for the
transponder.
7 -
If a transponder is found, select
Store
and press
OK
to
store the new transponder on the selected LNB.
8 -
Select
Exit
to leave the manual installation.
Troubleshooting
The TV cannot find the satellites I want or the TV installs the
same satellite twice
•
Make sure that the correct number of satellites is set in
Settings at the start of the installation. You can set the TV to
search for One, Two or 3/4 satellites.
A dual head LNB cannot find a second satellite
•
If the TV finds one satellite but cannot find a second one,
turn the dish a few degrees. Align the dish to get the strongest
signal on the first satellite. Check the signal strength indicator
of the first satellite on screen. With the first satellite set at the
strongest signal, select
Search again
to find the second satellite.
•
Make sure the settings are set to
Two satellites
.
Changing the installation settings did not solve my problem
•
All settings, satellites and channels are only stored at the end
of the installation when you finish.
All satellite channels are gone.
50
Satellite channels / Satellite installation
