Philips 40PFH6300, User Manual

Page: 28 / 56

9
Recording and
pause TV
9.1
Recording
What you need
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need…
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
- a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
In terms enforcement of copyright legislation, some
DVB providers can apply different restriction by
means of DRM (Digital Right Management)
technology. In case of broadcasting protected
channels, recording, record validity or number of
views may be restricted. Recording may be
completely prohibited. In case of trying to record a
protected broadcasting or play back an expired
recording, , an error message can appear.
Record a programme
Record now
To record the programme you are watching right now,
press

(Record) on the remote control. The
recording will start immediately.
To stop the recording, press

(Stop).
When TV Guide data is available, the programme you
are watching will be recorded from the moment you
pressed the recording key until the programme
ends. If no TV Guide data is available, the recording
will only last 30 minutes. You can adjust the end time
of the recording in the list of
Recordings .
Schedule a recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a programme…
1. Press

TV GUIDE .
2. On the TV Guide, select the channel and
programme you wish to record. Press

(right)
or

(left) to scroll through the programmes of a
channel. Use the colour key

Day to select the
day you need.
3. With the programme highlighted, press the colour
key

Record . The programme is scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
leave the TV switched to Standby and the USB Hard
Drive switched on.
List of recordings
You can view and manage your recordings in the list
of recordings. Next to the list of recordings, there is a
separate list for scheduled recordings and reminders.
To open the list or recordings…
1. Press

TV GUIDE .
2. Press the colour key

Recordings .
3. In the list of recordings, select the
tabs
New , Watched or Expired and press OK to
filter your view.
4. With a recording selected in the list, you can
remove the recording with the colour
key

Remove or stop an ongoing recording
with the colour key

Stop Recording . You can
rename a recording with the colour key

Rename .
Broadcasters can limit the number of days a recording
can be viewed. When this period expires, the
recording will be marked as expired. A recording in
the list can show the number of days before it expires.
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as
Failed .
Recording Conflicts
When two scheduled recordings are overlapping in
time, there is a recording conflict. To solve a recording
conflict, you can adjust the start and end time of one
or both scheduled recordings.
To adjust the start or end time of a scheduled
recording…
1. Press

TV GUIDE .
2. Press the colour key

Recordings .
3. At the top of the screen, select

Scheduled and
press OK .
4. In the list of scheduled recordings and reminders,
select the tab
Recordings and press OK to view
the scheduled recordings only.
5. Select the scheduled recording that conflicts with
another scheduled recording and press the colour
28