background image

5

2 Important

Positioning the TV

Large screen TVs are heavy. 2 people are required to carry and

handle a large screen TV.

Make sure to hold the upper and bottom frames of the unit

fi

 rmly as illustrated.

•  Install the unit in a horizontal and stable 

position.

•  Do not install the unit in direct sunlight 

or in a place subject to dust or strong 

vibration.

Depending on the environment, the 

temperature of this unit may increase 

slightly. This is not a malfunction.

•  Avoid a place with drastic temperature changes.
•  Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of 

the picture and / or sound may be generated if the unit is placed 

too close to them. In this case, please ensure enough space 

between the external devices and the unit.

Do not insert the AC power cord into the power socket outlet 

before all the connections are made.

•  Ensure that you always have easy access to the AC power cord

or plug to disconnect the TV from the power.

  Before you move the TV, disconnect attached cables to prevent 

damage to connectors.

Be sure to unplug the AC power cord from the AC outlet 

before moving or carrying the unit.

Regulatory notices

Do not place the unit on the furniture that is capable of being tilted 

by a child and an adult leaning, pulling, standing or climbing on it. A 

falling unit can cause serious injury or even death.

This apparatus should not be placed in a built-in installation such as 

a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this 

apparatus.

Press  to turn the unit on and go into standby mode.

To completely turn off the unit, you must unplug the AC power 

cord.

Disconnect the AC plug to shut the unit off when trouble is found 

or not in use. The AC plug shall remain readily available.
Never use a gas duster on this TV.

The gas trapped inside of this unit may cause ignition and explosion.

CAUTION:

Danger of explosion if battery is incorrectly replaced. 

Replace only with the same or equivalent type.

WARNING:

Batteries (battery pack or battery installed) shall not 

be exposed to excessive heat such as sunshine, 

fi

 re 

or the like.

WARNING:

To prevent injury, this apparatus must be securely 

attached to the furniture / wall in accordance with the 

instructions. Tipping, shaking or rocking the unit may 

cause  injury / death.

Environmental care

The packaging of this product is intended to be recycled. 
Contact your local authorities for information about how to recycle 

the packaging.
For product recycling information, please visit - 

www.recycle.philips.com

End of life directives

Philips pays a lot of attention to produce environment-friendly 

products in green focal areas. Your new TV contains materials 

which can be recycled and reused. At the end of its life, specialized 

companies can dismantle the discarded TV to concentrate the 

reusable materials and to minimize the amount of materials to be 

disposed of. Please ensure you dispose of your old TV according to 

local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury 

and cadmium. Nevertheless, in many areas batteries may not be 

disposed of with your household waste. Please ensure you dispose 

of batteries according to local regulations.

Summary of Contents for 40HFL4683S













Reviews: