Philips 37PFL5332D/37, Service Manual

Page: 13 / 172

13 TPM1.0U LA
5. Service Modes, Error Codes and Fault Finding
39 VIDEO_PWM_NORMAL 0~255 Pass
40 VIDEO_PWM_MEDIUM 0~255 Pass
41 VIDEO_PWM_MAXIMUN 0~255 Pass
42 VGA_PWM_MIN to limit PC brightness range 0~255 Dark Pass
43 VGA_PWM_MAX 0~255 Bright Pass
//YPbPr H/V Position (value different by each timing)
44 YPBPR_POS_H Pass
45 YPBPR_POS_V interlace no effect, only progressive can be adjusted Pass
46 YPBPR_PHASE Manual adjust HDMI phase Pass
//Audio
47 AUD_GAIN_TV
volume different between audio source , for
each source volume to be the same 64~-64 Pass
48 AUD_GAIN_DTV 64~-64 Pass
49 AUD_GAIN_HDMI 64~-64 Pass
50 AUD_GAIN_SCART 64~-64 Pass
51 AUD_GAIN_DVD
52 AUD_HEADPHONE_VOL
12~-64 Pass
53 AUD_BALANCE amplifier left and right volume -50~50 Press Left and Right to change value Pass
//Tuner & Panel Id
54 TUNER ID
4 is PHILIPS_FQA1236,
5 is Forward,
6 is PHILIPS_FQA1236_E,
7 is ALPS_TDQU4
4,5,6,7 Pass
55 PANEL_ID value the same to CLI command Pass
Smart picture control items: (values different by smart picture)
User Menu OSD:(Back-End) can be changed when factory mode
Contrast
Brightness
Color
Sharpness
color temperature
Tint
Noise Reduction
Dynamic Contrast
Factory menu OSD can be changed when factory mode
SP_MODE_PWM (when Dynamic contrast Off)
SP_MODE_3DNR (range 0 to 5)
Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the picture menu.
Note: This Magnavox TV has been set at the factory to look best in bright store environments, which typically use
fluorescent lighting. As your home will likely not be as well lit as a store, we recommend that you cycle through the various
smart picture modes to find the one that best suits your own viewing conditions. Most consumers will find that
Natural is
the correct choice.
You can press the Smart picture button on the remote control repeatedly to select either Personal, Rich, Natural, Soft, or
Powersaver picture settings.
Note:
- When you watch programs by Composite Video signal, it’s recommended to select
Soft or Power saving Mode via Smart
picture.
- The moment you are in a predefined Smart picture setting and you modify the Picture menu, all values of the menu will
overwrite those previously madein personal setting.