Philips 32PHS5505/12, Service Manual

Page: 108 / 110

These substances, mixtures and components shall be disposed of or recovered in compliance with
Directive 2008/98/EC
o) cathode ray tubes: the fluorescent coating has to be removed N/A
p) equipment containing gases that are ozone depleting or have a global warming potential (GWP)
above 15, such as those contained in foams and refrigeration circuits: the gases must be properly
extracted and properly treated. Ozone-depleting gases must be treated in accordance with
Regulation (EC) No 1005/2009
N/A
q) gas discharge lamps: the mercury shall be removed N/A
Below is a sample for you to follow
Necessary information according to ANNEX VII of DIRECTIVE 2012/19/
on waste electrical and electronic equipment (WEEE)
Batteries can easily be removed from the remote
control or printed circuit board assembly once the
back cover of the remote control or product has been
removed.
The back cover of the display can easily be removed
by hand and screw driver.
Once removed this will expose the accessible
electronic units (printed circuit boards),
which can now be easily removed with appropriate
tools.