16
EN
3
Select
[Start frequency (MHz) / End
Frequency (MHz)]
and use the number
keys to enter
the three-digit channel
frequencies.
4
Select
[Start Search]
and press
OK
.
5
Press
(Home)
Exit.
Skipping channels
1
Press
ADJUST.
2
Press
Select
[TV]
>
[Channels]
>
[Channel Edit].
»
The
[Channel Edit]
menu will be
displayed.
3
Press
Select
the channel you wish to
skip and press OK.
Select
[Skip]
, then press
to make the change.
4
If you wish to confirm, please select
[Save]
and press
OK.
5
You can skip more channels by repeating
the steps above. Press
OK
to start finding
channels.
Tip
•
Use the number buttons on the remote control to access
channels that were skipped.
•
If you want to watch the channel, please repeat steps
1 to 4, thenpress OK Cancel them.
Swapping channels
1
Press
ADJUST
.
2
Press
Select
[TV]
>
[Channels]
>
[Channel Edit].
»
The
[Channel Edit]
menu will be
displayed.
3
Press
Select
the channel you wish to
swap, then press the red button.
4
Press
Selectthe channel you wish to
swap, then press the red button to confirm.
6 Setting up
channels
This chapter explains how to reconfigure and
fine-tune channels.
Setting up channels
automatically
Automatically finds and saves channels.
1
Press
ADJUST.
2
Press
Select
[TV]
>
[Channels]
>
[Channel Scan]
.
3
Press
OK
.
»
The TV will automatically start searching
for channels.
Updating channels
1
Press
ADJUST.
2
Press
Select
[TV]
>
[Channels]
>
[Update Scan]
.
3
Press
OK
.
»
The TV will start to update the channels.
Setting channels manually
You can manually find and save analog TV channels.
Finding and saving new TV channels
1
Press
ADJUST.
2
Press
Select
[TV]
>
[Channels]
>
[Search for Analog Channels]
.
»
The
[Search for Analog Channels]
menu
is displayed.
