3
Network
3.1
Network and Internet
Home network
To enjoy the full capabilities of your Philips TV, your
TV must be connected to the Internet.
Connect the TV to a home network with a high-speed
Internet connection. You can connect your TV
wirelessly or wired to your network router.
Connect to network
Wireless connection
What you need
To connect the TV to the Internet wirelessly, you need
a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the connection
Wireless
To make a wireless connection…
1 -
Make sure that the router of your wireless network
is switched on.
2 -
Press
, select
Network
and press
(right) to
enter the menu.
3 -
Select
Connect to network
and press
OK
.
4 -
Select
Wireless
and press
OK
.
5 -
Select
Scan
to scan for your wireless network. If
you have a router with WPS (Wi-Fi Protected Setup),
you can select
WPS
. Select your choice and press
OK
.
6 -
In the list of found networks, select on your
wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select
Manual
entry
to enter the network name yourself.
7 -
Depending on the type of router, enter your
encryption key - WEP, WPA or WPA2. If you entered
the encryption key for this network before, you can
select
Done
to make the connection immediately.
If your router supports WPS or WPS PIN, you
select
WPS
,
WPS PIN
or
Standard
. Select your
choice and press
OK
.
8 -
A message will be shown when the connection is
successful.
WPS
If your router has WPS, you can directly connect to
the router without scanning for networks. If you have
devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
1 -
Press
, select
Network
and press
(right)
to enter the menu.
2 -
Select
Connect to network
and press
OK
.
3 -
Select
WPS
then press
OK
.
4 -
Go to the router, press the WPS button and return
to the TV within 2 minutes.
5 -
Select
Connect
to make the connection.
6 -
A message will be shown when the connection is
successful.
WPS with PIN code
If your router has WPS with a PIN code, you can
directly connect to the router without scanning for
networks. If you have devices in your wireless
network that use the WEP security encryption system,
you cannot use WPS.
1 -
Press
, select
Network
and press
(right) to
enter the menu.
2 -
Select
Connect to network
and press
OK
.
3 -
Select
Wireless
and press
OK
.
4 -
Select
WPS
, then
select
WPS pin
then
press
OK
.
5 -
Write down the 8-digit PIN code shown on
screen and enter it in the router software on your PC.
Consult the router manual on where to enter the PIN
code in the router software.
6 -
Select
Connect
to make the connection.
7 -
A message will be shown when the connection is
successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
7
