Alignments
EN 50
Q552.2L LA
6.
2012-Mar-16
back to
div. table
Note
1). Example
6.5
Reset of Repaired SSB
A very important issue towards a repaired SSB from a Service
repair shop (SSB repair on component level) implies the reset
of the NVM on the SSB.
A repaired SSB in Service should get the service Set type
“00PF0000000000” and Production code “00000000000000”.
Also the virgin bit is to be set. To set all this, you can use the
ComPair tool or use the “NVM editor” and “Dealer options”
items in SAM (do not forget to “store”).
After a repaired SSB has been mounted in the set (set repair
on board level), the type number (CTN) and production code of
the TV has to be set according to the type plate of the set. For
this, you can use the NVM editor in SAM. This action also
ensures the correct functioning of the “Net TV” feature and
access to the Net TV portals. The loading of the CTN and
production code can also be done via ComPair (Model number
programming).
After a SSB repair, the original channel map can be restored,
provided that the original channel map was stored on a USB
stick before repair was commenced and that basic functionality
of the TV, needed for this procedure, was not hampered as a
result of the defect. The procedure of “channel map cloning” is
clearly described in the (electronic) user manual.
In case of a display replacement, reset the “Operation hours
display” to “0”, or to the operation hours of the replacement
display.
6.5.1
SSB identification
Whenever ordering a new SSB, it should be noted that the
correct ordering number (12nc) of a SSB is located on a sticker
on the SSB. The format is <12nc SSB><serial number>. The
ordering number of a “Service” SSB is the same as the ordering
number of an initial “factory” SSB.
6.6
Total Overview SAM modes
Table 6-12 SAM mode overview
Bit 0 (LSB)
1
FAN
0
1)
0 = no fan
1 = fan(s) present)
Option 8 (prescribed value 00012
1)
)
Bit 15 (MSB)
32768
Test 8
0
1)
-
Bit 14
16384
Test 7
0
1)
-
Bit 13
8192
Test 6
0
1)
-
Bit 12
4096
Test 5
0
1)
-
Bit 11
2048
Test 4 (Trick Mode)
0
1)
0 = OFF
1 = ON
Bit 10
1024
Test 3 (XRay)
0
1)
0 = OFF
1 = ON
Bit 9
512
Test 2 (DBV-T light)
0
1)
0 = OFF
1 = ON
Bit 8
256
Test 1 (Monitor out)
0
1)
0 = OFF
1 = ON
Bit 7
128
not used
0000
1)
-
Bit 6
64
Bit 5
32
Bit 4
16
Bit 3
8
WM DRM10
1
1)
0 = OFF
1 = ON
Bit 2
4
HBBTV
1
1)
0 = OFF
1 = ON
Bit 1
2
DVB-T2 Installation
0
1)
0 = OFF
1 = ON
Bit 0 (LSB)
1
DVB-T2
0
1)
0 = OFF
1 = ON
Option & Bit
Dec. Value
Option Name
Prescribed Value
1)
Description
18310_221_090318.eps
090319
Main Menu
Sub-menu 1
Sub-menu 2
Sub-menu 3
Description
Hardware Info
A. SW version
e.g. “Q5551_0.9.1.0
Display TV & Stand-by SW version and CTN serial
number
B. Stand-by processor version e.g. “STDBY_83.84.0.0”
C. Production code
e.g. “see type plate”
Operation hours
Displays the accumulated total of operation hours.TV
switched “on/off” & every 0.5 hours is increase one
Errors
Displayed the most recent errors
Reset error buffer
Clears all content in the error buffer
